UNOFFICIAL OPENVIX FOR H3 AND H5 ZGEMMA RECEIVERS

will work on the zgemma hS, H.2s, h.2h, h3.2tc and all of the h5 range

THE OPENVIX TEAM NOW SUPPORT THE ZGEMMA H7 & H9 ☺

the build for these receivers can be installed from the main page

PLEASE NOTE THAT THESE BUILDS ARE BASED ON OPENVIX AND NO SUPPORT IS OFFERED BY THE OPENVIX TEAM FOR ZGEMMA H3 & H5 SERIES RECEIVERS

Any problems post in the builds forum on techkings:

TechKings Builds Forum

DO NOT POST IN THE OPENVIX FORUM WITH QUESTIONS ABOUT THIS BUILD

FULL INSTRUCTIONS

OpenViX 5.4  series - Current Version  5.4.001

WILLOBUILD IS NOW INSTALLED ONLINE RATHER THAN FLASHING BY USB

YOUR BOX MUST HAVE A NETWORK CONNECTION AND YOUR STORAGE DRIVE SHOULD BE PLUGGED IN. (PREFERABLY FORMATTED AS EXT4 AND MOUNTED AS /MEDIA/HDD).

CONNECT TO YOUR BOX USING PUTTY – ENTER IP ADDRESS OF BOX AND LOGIN WITH ROOT.

PUTTY CAN BE DOWNLOADED HERE

VIEW GUIDE

 

COPY THE CODE BENEATH YOUR BOX NAME AND PASTE BY RIGHT CLICKING IN THE PUTTY TERMINAL WINDOW AND PRESS ENTER     

Zgemma H3 Series       (HS, H.2S, H.2H & H3.2TC)

wget --no-check-certificate -O install_h3.sh http://www.willobuild.net/files/Scripts/install_h3.sh && bash install_h3.sh

Zgemma H5 Series         (Will work on any H5)

wget --no-check-certificate -O install_h5.sh http://www.willobuild.net/files/Scripts/install_h5.sh && bash install_h5.sh

AFTER THE BOX HAS REBOOTED, use the backup-restore plugin to restore bouquets, line, timers etc that are automatically saved before flashing

INSTRUCTIONS FOR SETTING UP TUNERS AND AUTOBOUQUETSMAKER

Due to this being a home brewed build, there is no image download option from the vix team in image manager

use the software update option or make a settings backup, flash the latest build from hereand restore your settings backup

i now have to host my own feeds for this build so any donations towards server costs would be greatly appreciated - thanks, willo

                                     Thanks to KiddaC for his amazing skins

Flashing any firmware to your receiver carries an inherent risk. (i.e. loss of power during the flashing process may cause your receiver not to boot).
The use of WilloBuild is at your own discretion and risk and with agreement that you will be solely responsible for any damage to your Enigma2 receiver or loss of data that results from such use.